Conel FLOW CUT BOX - ABS Front Wall Installation Kit; Changing the Carbon Filter

13.
Changing the carbon filter
Figure 10
/ Priseuptheltercover(1)withascrewdriverandremovefromtank.
/ Lioutcarbonlter(2)andreplace.
/ Retltercoverbypressingintoplace
14.
ABS front wall installation kit
Thiskitisrequiredforinstallaonoftheliingsystembehindafrontwallifvenlaonviatheroof
through an independent vent line is not possible/economical. It contains all required parts to install the
breatherandventwithacvecharcoallteronthefrontwall.
KBN: ABSVIS
NOTE:
Thesealfortheconneconoftheventlinetothetankissuppliedasstandardwiththeliingunit
(see chapter 3).
1
2
1
43