Conel FLOW CUT BOX - Dangers Which Could Arise Due to Non-Observance of the Safety Instructions; Carrying out Work in a Safety Conscious Manner; Safety Regulations for the Owner;Operator

The presence of a dangerous voltage is idenfied with the safety symbol.
See DIN 4844-W8.
ATTENTION!
Appliestosafetyinstrucons,thenon-observanceofwhichcoulddamagetheunitoraectit‘s
funconing.
Symbols directly on the unit itself, e. g.
/ Nameplate
mustbecarefullyobservedandmustbemaintainedinalegiblecondion.
2.1
Dangers which could arise due to non-observance of
the safety instructions
Thenon-observanceofthesafetyinstruconscanleadtobothdangertopersonnelandalsotopossible
harmtotheenvironmentortheunititself.Non-observanceofthesafetyinstruconscaninvalidatethe
rightsoftheusertoanycompensaonorredress.
In detail, non-observance can for example result in the following dangers:
/ Failureofimportantfunconsoftheunit/installaon
/ Dangertopersonnelbyelectrical,mechanicalorchemicalinuences
/ Danger to the environment by leakage of dangerous substances
2.2
Carrying out work in a safety conscious manner
Thesafetyinstruconslistedinthisoperangmanual,theexisngNaonalRegulaonsforSafety,as
wellasanyinternaloperangorsafetyregulaonswhichapplyintheuser‘sownpremisesmustbe
observed.
2.3
Safety Regulations for the owner/operator
Alldangersduetoelectricitymustbeavoided(fordetailsconsulttheregulaonsof
your local Electricity Supply Company).
32