EasyManua.ls Logo

Consumer Cellular Link - Changing the Ringtone and Notification Sound; Turning System Sounds On;Off; Adjusting Volumes; Switching to Vibration or Silent Mode

Consumer Cellular Link
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 17
PERSONALIZING
CHANGING THE RINGTONE AND NOTIFICATION SOUND
You can customize the default ringtone for incoming calls and the default
notification sound.
1. From the home screen, select > Settings > Sound profiles > Sound.
2. Select Edit.
3. Highlight Phone ringtone or Default notification sound, and press the
OK Key.
4. Select the ringtone you'd like to use, and press the OK Key.
NOTE: If you have additional audio files saved in the internal storage or the
microSDHC card, select Add ringtone or Add notification at the bottom of
the list and select one as the ringtone.
NOTE: See
Contacts – Setting a Ringtone for a Contact
for how to assign a
special ringtone to an individual contact.
TURNING SYSTEM SOUNDS ON/OFF
1. From the home screen, select > Settings > Sound profiles > Sound.
2. Select Edit.
3. Highlight Power on sounds, Also vibrate for calls, or Key tone, and then
press the OK Key to enable or disable each type of sound.
PERSONALIZING
ADJUSTING VOLUMES
1. From the home screen, select > Settings > Sound profiles > Sound.
2. Select Edit.
3. Highlight the Media volume, Alarm volume, Ring volume, or Notification
volume slider.
4. Press left or right on the 4-way Navigation Key to adjust the volume.
NOTE: You can adjust the media volume when a media application is in use by
pressing the Volume Key. If no media application is active, press the Volume
Key to adjust the ring volume (or the earpiece volume during a call).
SWITCHING TO VIBRATION OR SILENT MODE
You can set the phone to vibration or silent mode by using one of the
following methods.
Keep pressing the lower end of the Volume Key when no media
application is active to switch the phone to vibration mode. Press the key
again in vibration mode to switch the phone to silent mode.
From the home screen, select > Settings > Sound profiles and select
Silent only or Vibrate only to switch to silent or vibration mode.
From the home screen, press and hold the Vibration Mode Key to turn on
or off vibration mode.
NOTES:
Silent and vibration modes will not silence your alarms.
To instantly turn off an incoming call ringtone, press the Volume Key.

Table of Contents

Other manuals for Consumer Cellular Link

Related product manuals