Contec 08A - Unit; User Switch

7
Unit
There are two units: "mmHg" and "kPa".
The default is: "mmHg".
To switch "mmHg" and "kPa" units, enter the 【SYSTEM SETUP】 submenu in 【SYSTEM MENU】,
and complete switching in【UNIT】item.
User Switch
The Blood Pressure monitor stores the measure results of three users automatically, and up to 100 items for
every user.
Users can press 【USER】button in main interface to switch user. Or press 【USER PURVIEW】 item in
【SYSTEM SETUP】 menu to switch user.
Note
When the 【USER PURVIEW】 is set to be 【ALL】, current user can be switched under main
interface; when set to a certain user, it will not be able to switch.
All manuals and user guides at all-guides.com