Causes Solutions
BP measurement
values too high or
too low.
Cuff is not connected correctly.
Correctly connect cuff (refer to 8
page)
Talk or move arms when
measuring
Keep quiet and restart a
measurement
The turnup clothing presses the
arm
Take off the clothing which presses
the arm, and restart a measurement
No pressure
Cuff leakage Buy a new cuff
The cuff windpipe is not correctly
connected with cuff
Correctly connect
short time
Loose cuff Correctly apply cuff
It can not carry on measurement when press the
measurement button
Switch on the power once again
and restart a measurement
Power off suddenly
when inflating
No use for a long time, the power
of batteries can be exhausted
owing to the changed temperature
Replace all four batteries with new
ones.
Hold the on/off
button but can not
start the device
Power of batteries can be
exhausted
Replace all four batteries with new
ones.
The battery polarities is reversed
Check the battery installation for
proper placement of the battery
polarities.
Other phenomenon
Switch on the power once again
and restart an operation.
Replace the batteries.
If no, please contact us.
To Next Page
Loading...
Need help?
General
