BP Measurement
Accurate Measurement Way
Measurement in quiet and relaxing state.
1.Place your arm on a table.
2.The cuff is level with your heart.
3.The palm of the hand is up, and the body relax.
Try to measure your blood pressure at the same time each day with the same arm
and the same pose for consistency.
The high and low location of cuff will cause changes in measurement results.
Do not touch BP monitor, cuff and windpipe during measurement.
Measurements should be taken in a quiet place and the body is in relaxing state.
Remain still 4~5 minutes before measurement.
Relax the body, do not let the muscle activity.
Do not talk and movement during the measurement.
Wait 4~5 minutes between measurements
Do not use a cellular phone near the device
BP Measurement
Press 【START/STOP】 button to take a measurement.
Start measurement measurement result
During measurement, please keep correct pose and quiet state, do not move.
Stop Measurement
During measurement , if you wish to stop measuring , press 【START/STOP】 button to stop and deflate.
Confirm Measurement Value
Measurement value can be automatically stored.([using memory function] refer to 10 page)
*Self-diagnosis and treatment using measured results may be dangerous. Follow the instructions of your
physician.
To Next Page
Loading...
Need help?
General
