Applying the Arm Cuff
The measurement can be carried out by applying the cuff on left or right arm.
Remove tight-fitting clothing from your upper arms.
Carry out the operation in a room with comfortable temperature.
When measuring, take the thick clothes off instead of rolling up the sleeves.
In order to measure accurately,pay attention to applying the cuff properly (left arm).
① Make sure the air plug is securely inserted in the main unit.
② Stretch cuff into a barrel for the arm can conformable enter into the barrel.
③ Arm penetrate throught the cuff, the air tube of the cuff will pass the top of your palm.
④ Apply the cuff to your upper arm. The color marker is on the inside center of your arm and make the
air tube aligned with your middle forger.
⑤ The bottom of the cuff should be approximately 2cm~3cm above your elbow.
⑥ Be fixed with cloths, and wrapped tight cuff, the arm and the cuff should not have gaps.
To Next Page
Loading...
