9. Touch Panel
40
User’s Manual
Notes!
- The USB touch panel driver software requires V1.20 or later of
IPC-SLIB-01.
- The USB connection can only be used on Windows XP, 2000, or
98SE. Connect via the RS-232C interface if using a different
OS.
- Use either USB or RS-232C for connecting the touch panel.
The touch panel cannot be connected via both interfaces at the
same time.
- When using the USB connection, the screen image may
disappear momentarily when the USB cable is connected or
disconnected and when the computer power is turned ON or
OFF.
To Next Page
Loading...