Conti Monaco MC - Hot Water Dose Programming

Edition 05/2021 - MC – Technical documentation - page 19
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
9.2 Hot water dose programming:
«Hot water» key «Hot water» key
Methodology:
One programming dose is available for each outlet:
 Press key the “MENU” from the coffee group nearest the outlet to be programmed.
 The display show “Coffee boiler T”
 Press 2 times the “+” key: the display shows “Doses setting”
 Press the “MENU” key: the display shows:
 Push hot water key to start the flow and push again when the water volume is correct.
 The timing key is registered.
Doses setting
XX s YY ml