Edition 05/2021 - MC – Technical documentation - page 8
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
5 FIRST INSTALLATION
A. Open the water supply tap
B. Switch on the machine using the ON/OFF switch under the drip tray.
C. During 1 second
The general display shows the software version “Monte Carlo 2.18”.
D. According the situation the display shows:
E. Enter the password to access the first installation, as follows:
1° step:
Press MENU for 6 seconds
The display shows:
OFF
OFF
MC 2.18
Please
wait!
Push “where
you want" on the display during 3
sec until:
To Next Page
Loading...
