Conti Monaco MC - Quality Criteria

Edition 05/2021 - MC – Technical documentation - page 44
SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
12 QUALITY CRITERIA
 Quality criteria programming:
First, the user may choose his own quality criteria.
These are the acceptable minimum and maximum flow rates for the estimated product.
 The user needs to choose the type of display « Quality criteria »:
 The display during the extraction becomes:
 The cursor  moves (7 positions) depending of the measured flow (ml/s).
 There are minimum and maximum values for espresso.
 There are minimum and maximum values for coffee.
 The cursor shows 7 positions matching to 7 values included between the programmed
mini and max.
 For example: programmed value: Min = 0.80 ml/s / Max = 1,20 ml/s
 Position 1 = flow between 0.80 ml/s and 0.86 ml/s
 Position 2 = flow between 0.86 ml/s and 0.91 ml/s
 Position 3 = flow between 0.91 ml/s and 0.97 ml/s
 Position 4 = flow between 0,97 ml/s and 1,02 ml/s (median position)
 Position 5 = flow between 1,02 ml/s and 1,08 ml/s
 Position 6 = flow between 1,08 ml/s and 1,14 ml/s
 Position 7 = flow between 1,14 ml/s and 1,20 ml/s
 - - -  - - - 
XXs YYYml
Quality Criteria
«
-
+
√
√
ESP Value (ml/s)
Min:1.5 Max:2.2
-
+
√
KF VALUE (ml/s)
Min:2.5 Max:4.5
-
+
√
+ or – to change the value
√ to validate and proceed
Adjustable value: 0,5 to 4,5
The mini can’t be > to the maxi
+ or – to change the value
√ to validate and proceed
Adjustable value: 0,5 to 6
The mini can’t be > to the maxi