TESTING...
Testing with AutoLog Off
Testing in the Dark
However, if your result is below 70 mg/dL or above
250 mg/dL, you will always see your result without
pushing a button. For a high or low blood sugar
result, you will always see your result after a
5-second countdown.
Your meter features a
countdown timer. If you
make your selection very
quickly, you may see the
remainder of the testing
countdown.
NOTE: If you changed the default settings, your
alerts will be based on those settings.
Your test result shows as
large numbers and then
changes to the normal
test result screen.
Testing with AutoLog Off
After applying blood to the test strip when AutoLog is
turned off, your result will appear after the 5 second
countdown (see page 56).
You may now set a Reminder or add a Note.
Depending on what you have chosen in Setup, you
will have the option to send your test result to your
pump or it will be sent automatically. For results under
20 mg/dL or over 600 mg/dL, see page 33.
You can now set an optional Reminder (see page 40)
or add a Note (see page 46).
Remove the test strip from the meter. Hold down the
Menu button for 2 seconds to turn the meter off, or
press the Menu button once to go to the Main Menu.
To Next Page
Loading...
Need help?
General
