GETTING
STARTED
GETTING
STARTED
5
4
TOP VIEW
English
Espanol
OK
LANGUAGE
Language Selected:
English
MENU
Logbook
Trends
Setup
Initial Setup
Initial Setup
Using the Menu Button
2. Press the ▲ or ▼ button to select your desired
language. When highlighted, press the OK button.
A screen confi rms your
language.
First charge your meter. You can use your computer or
the included wall charger to charge your meter. When
you fi rst turn on your
Contour
®
next LINK meter, a
setup sequence begins. The setup process walks you
through the steps for meter setup and allows your
meter to connect to your compatible MiniMed insulin
pump. Your compatible MiniMed insulin pump must be
nearby.
1. Press and hold the Menu button
until the meter turns on. After a
welcome screen, you will see
the Select
Language
screen.
Using the Menu Button
• To turn on the meter, press and hold the Menu
button until the meter turns on.
The Main Menu has 3 choices: Logbook, Trends
and Setup.
• Select one by pressing the button next to your
choice. See the following pages for more details on
“Setup”.
• To go back to the previous screen, press the Menu
button once.
• To turn the meter off, press and hold the Menu
button for 2 seconds.
• To turn the test strip port light on with the meter
off, give the Menu button two quick presses. Two
quick presses of the Menu button will also turn off
the light.
These meter screen images are for illustration
purposes only.