MAIN MENU
FUNCTIONS
MAIN MENU
FUNCTIONS
57
56
AutoLog is Off.
CHANGE TARGET
70 – 130
70 – 180
OK
Target
Trends Range
High and Low Limits
OK
SETUP
70–130
70–180
Change
Go Back
TARGET
Sound
AutoLog: On
Target
OK
SETUP
Sound is On
Accept
Turn Off
AUTOLOG
Changing the Blood Glucose Target Range
Turning AutoLog On/Off
2. To turn the AutoLog
off, press the Turn Off
button.
Turning AutoLog On/Off
The AutoLog feature lets you mark your test result as
Before Meal or After Meal during the test countdown.
You can select No Mark if you are testing at times
other than before or after a meal. Your meter comes
with AutoLog turned on. We recommend that you keep
this feature turned on.
NOTE: When AutoLog is ON, a result will not
appear unless marked as Before Meal, After Meal,
or No Mark; or if the result is outside the
high/low limits.
1. Press the ▲ or ▼ button to select AutoLog. Press
the OK button.
To keep the AutoLog on, press the Accept button.
Changing the Blood Glucose Target Range
A screen confi rms your
choice. The Setup menu
will appear.
4. To make changes to
your target range, press
the Change button,
otherwise Go Back.
Press
for Help.
NOTE: Targets can only be set inside your selected
High and Low Limit(s). For additional information,
you may contact Customer Service. See the back
cover for contact information.
Your
Contour
®
next LINK meter comes preset
with 70–130 mg/dL for Before Meal testing and
70–180 mg/dL for After Meal testing. Ranges can be
changed to personal targets decided by you and/or
your health care professional.
1. Press the Menu button to go to the Main Menu.
2. Press the Setup button.
3. Press the ▲ or ▼ button to select Target. Press the
OK button.
5. Press the ▲ or ▼
button to select your
desired
(Before Meal)
low target. Press the
OK button.
To Next Page
Loading...
Need help?
General
