Plugging the VFC400-WiFi into a USB
port
VFC400-WiFi User Guide 43
Accessing the files
If the logger was configured to generate files, a new drive letter or mounted device will appear. The device
name will be created from the serial number of the VFC400-WiFi. You can access the files by browsing to the
newly created drive and double-clicking the PDF, CSV or LTD files. For PDF files you need Adobe Acrobat
Reader or a similar PDF viewer. To open the LTD file you need to install the free Control Solutions VTMC
software. CSV files can be opened with a text editor, or imported into a spreadsheet program such as
Microsoft
®
Excel.
The file names contain information about the recorded data, which is detailed in Interpreting the Data. If a
logger has only taken pre-start readings, PDF and CSV files will not be created.
To retain the logger's generated files please copy them to a permanent storage location on your
computer, such as the Documents folder (they are not automatically copied).
The data on the logger are retained, so each time you plug the VFC400-WiFi back into the computer
the files are re-generated, until the device is re-configured.
To Next Page
Loading...