Need help?Do you have a question about the Converteam LV7000 and is the answer not in the manual?
Discusses live parts, hot surfaces, and risks of incorrect installation or operation.
Highlights national safety regulations and adherence to relevant installation standards.
Advises on additional safety facilities and not touching live parts after power isolation.
Highlights user responsibility for assessing and addressing risks like incorrect speed or shutdown.
Warns about high potential inside components when connected to power, posing severe injury risk.
Provides general, Ethernet, communication, protocol, environment, and safety specifications for the OPT-CI card.
Step-by-step guide for installing the board in the LV7000 unit.
Crucial safety reminder to switch off the converter before changing boards.
Describes installing the board in slots D or E and fitting the grounding plate tightly.
Guides on setting IP addresses using the NCIP Config tool and scanning network nodes.
Explains updating the option board's firmware using the NCIP Config tool.
Defines Modbus/TCP as a client-server protocol for monitoring and controlling devices via TCP port 502.
Explains the composition of Modbus request and response messages, including transaction ID and data.
Lists supported Modbus registers like Input Registers, Holding Registers, Coils, and Input Discretes.
Provides an address map for holding registers and their general purposes like Application IDs and Process Data.
Details programming steps for running and stopping the engine via fieldbus using Control Word and Speed Reference.
Discusses fieldbus errors (53, 54) related to connection and board issues.
Lists Modbus TCP exceptions (e.g., illegal function, illegal address) and their possible causes.
General| Brand | Converteam |
|---|---|
| Model | LV7000 |
| Category | Media Converter |
| Language | English |
To Next Page