Service manual OEB/OES/OGB/OGS/Mini-world
KD / 31.03.2009 6_03d_Update der Software der EasyTouch-Steuerung_a_EN.doc
Page 1 / 5
Screenshot 1
6.3 Updating software for EasyTouch control ST7000
6.3.1 Updating the operating module (automatic) from version 1.3.0.0 onwards
Information:
A KD update (valid from version 1.3.0.0 onwards) consists of:
¾ UPD_[version number - consisting of 4 figures].zip
¾ SD_[version number - consisting of 4 figures].zip
¾ Update.zip
¾ UpdateSD.zip
¾ UpdateET.exe
¾ icsharpcode.sharpziplibce.dll
Instructions:
1. Place the new update in the root directory of an empty USB stick (with
maximum 2 GB memory).
2. Switch off the combi steamer.
3. Insert the USB stick into the combi steamer's communication module and
switch the appliance back on.
4. Confirm the screen now shown (see Screenshot 1) by pressing the "Start
update" button.
Æ The update will now take place automatically.
N.B:
If the combi steamer starts WITHOUT the update screen (Screenshot 1) in spite of
the USB stick (with the correct update) being inserted (if e.g. the USB stick is too
large or too slow), and it instead starts in the operating mode as usual, you need to
perform the update of the operating module manually
(see point 6.3.2).
i
To Next Page
Loading...
