Service Handbook OEB/OES/OGB/OGS
2.5 Functioning of the cooking programmes
2.5.6 Delta-T cooking
Set core temperature reached
Start cooking programme
T =
Difference between oven temperature and core temperature
i
Information:
With Delta-T cooking it is necessary to work closely with the core temperature
because the oven temperature is dependent on a gradually increasing core
temperature. The oven temperature will always be as high as the combination of
the selected Delta-T temperature and the core temperature.
When a programme with Delta-T cooking is started on the oven, the display will
indicate the set Delta temperature and the actual core temperature. The Delta
temperature is indicated by the "T" symbol on the display.
The Delta-T programme only operates in the convection programme.
When the selected core temperature is reached, the cooking programme will
switch off or automatically switch to the next step.
In this programme, it is possible that the fan motor will begin switching on and off
(pulsing).
In units with direct injection OES & OGS the core temperature probe is optional.
AS/11-2011 2_05_06e_Delta-T cooking_b
Seite 1 / 1
To Next Page
Loading...
Need help?
General
