Cool-Icam Plus - 9 Connecting Your Cool-Icam Plus to Your Computer; 10 Uploading Images;Audio Clips to Your Computer; For Windows Users; Running the Digital Camera Manager

www.cool-icam.com
© 2001 TCG. UK Version 1 0301
Page 18
9. Connecting your Cool-iCam Plus to Your Computer
The USB cable allows you to upload images from the Cool-iCam Plus to your PC or Mac. One end of the
cable connects to the USB port on the side of the Cool-iCam Plus and the other end connects to your
PC's or Mac’s USB port. When your Cool-iCam Plus is connected to your PC or Mac, it will draw power
from the PC in order to preserve your battery life.
The USB port can be found on the front or back panel of your PC or Mac. Look for this symbol   
next to the connection port. (Also see your PC or Mac operating manual for the location of your USB
connection port.)
When you first connect your Cool-iCam Plus to your PC, a message appears on screen saying "New
Hardware Found" and "Building Driver Information Database". After this, you can start to upload images!
USB Series "A" Plug
Connects to your PC or Mac
USB Series "B" Plug
Connects to your Cool-iCam Plus
10. Uploading Images and Audio Clips to Your Computer
10.2 Quick Reference
10.1 Running the Digital Camera Manager
DSC Mode
(Digital Still Camera)
Capture Still Image(s)
(In DSC Mode)
Adjust Resolution
(In Live Video Mode)
Live Video Mode
Create New Folder
Save Video /
Start or Stop Recording
(In Live Video Mode)
Save Still Image(s) /
Capture snap shot
(In Live Video Mode)
Adjust Color
Adjust Frame Rate
short-cut icon
on desktop
Delete Image(s)/
Movie Clip(s)
Delete Album
Send E-mail
Select the Digital Camera Manager icon from the Digital Camera
Manager program group on the Windows Start Menu or double-click
the Digital Camera Manager short-cut icon on the desktop.
You can now start to upload your images from your Cool-iCam Plus
by following the steps in Section 10.3:
•
•
Digital Camera Manager
For Windows® User:
Important Notes:
You can use the Digital Camera Manager to upload images taken by your Cool-iCam Plus at any time whether or not the Cool-iCam Plus is full.
Connect your Cool-iCam Plus to your PC via the USB cable. Plugging the USB connector into the Cool-iCam Plus will cause it to reset and issue a
double beep but all stored images will remain.
PC