42
5. Tap the Connect button up top. A page similar to the one below
6. Server URL and Stream Key are displayed here. Copy them and
enter them into their corresponding fields in the stream settings
section under the “Setting” deck of the OnAir app.
Note:1. Make sure the eye icon in the Stream Key field is shown
as to allow you to paste the key.
2. It is highly recommended to check the “Use a persistent
streamkey” checkbox to keep this stream key.
7. Connect the iPad to your StreamEnjin. The app will ask you about
the synchronization option. Tap Start.
8. Configure other settings on the app and press the GO LIVE
button
on the unit or on the app:
is shown:
StreamEnjin User Manual
To Next Page
Loading...