Cooper CF1100 - Reset

EvacuateEvacuate
Silence
Alarms
Silence
Alarms
Supervisor
FRE off
Supervisor
FRE off
Faults = Short circuits, broken detectors etc.
To remove faults from this list:
1) Fix Fault
2) Reset Panel
Faults = Short circuits, broken detectors etc.
To remove faults from this list:
1) Fix Fault
2) Reset Panel
Mute
Buzzer
Mute
Buzzer
OthersOthers
View Fires
AC = 19
View Fires
AC = 19
View Pre
Alarms
View Pre
Alarms
View
Disabled
View
Disabled
View
Faults
View
Faults
ResetReset
Mute BuzzerMute Buzzer
Enter the Supervisor Mode and Select “Mute Buzzer” from the Top MenuEnter the Supervisor Mode and Select “Mute Buzzer” from the Top Menu
EvacuateEvacuate
Silence
Alarms
Silence
Alarms
ResetReset
Supervisor
FRE off
Supervisor
FRE off
OthersOthers
View LogView Log
Check
Config.
Check
Config.
PrintPrint
Lamp TestLamp Test
View Fires
AC = 19
View Fires
AC = 19
View Pre
Alarms
View Pre
Alarms
Disabled
Disabled
Faults
Faults
Weekly TestWeekly Test
Enable/DisableEnable/Disable
Mute
Buzzer
Mute
Buzzer
ResetReset
Enter the Supervisor Mode and Select “Reset” from the top Menu. Select “Yes” to reset
the panel.
Enter the Supervisor Mode and Select “Reset” from the top Menu. Select “Yes” to reset
the panel.
This will Reset the Panel
Do you want to continue?
This will Reset the Panel
Do you want to continue?
YesYes
NoNo
001 14:22:49
Mains Failure
001 14:22:49
Mains Failure
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
passcode.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
passcode.
42