Cooper CF1100 - Auto Learn

Commission: Auto LearnCommission: Auto Learn
Service
FRE off
Service
FRE off
CommissionCommission
TestTest
ConfigureConfigure
Enter the Service Mode and Select Commission. Enter the Service Mode and Select Commission.
Auto LearnAuto Learn
This will erase the current CDR
Do you want to continue
This will erase the current CDR
Do you want to continue
YesYes
NoNo
Select “Auto Learn” from
the Configure Menu
Screen.
Select “Auto Learn” from
the Configure Menu
Screen.
Important:
Activating autolearn will
erase all existing
programming, text and
configuration data.
Important:
Activating autolearn will
erase all existing
programming, text and
configuration data.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
To activate the touch screen, touch the top left corner of the screen until the screen
illuminates. To enter the supervisor mode touch the supervisor button and enter the
service passcode.
ExitExit
Mute
Buzzer
Mute
Buzzer
Reset Reset
ExitExit
ResetReset
Service
FRE Off
Service
FRE Off
Load logo from PCLoad logo from PC
Load CDR from LaptopLoad CDR from Laptop
Download CDR to LaptopDownload CDR to Laptop
Auto LearnAuto Learn
Erase Log and ResetErase Log and Reset
Analogue LevelAnalogue Level
Printer SettingsPrinter Settings
Change Panel NumberChange Panel Number
Number of Panels
in Network
Number of Panels
in Network
Italian ModeItalian Mode
Mute
Buzzer
Mute
Buzzer
System DetailSystem Detail
Screen CoverScreen Cover
59