Coredy CX-E120 - Connect to an Existing Wifi Network; Method 1: Connect with a Web Browser

08
To extend the range of your WiFi network, you must
connect the extender to your existing WiFi network.
You can do this in one of two ways:
Method 1. Connect with a web browser.
Method 2. Connect with WPS. For more
information, see Method 2: Connect with WPS.
For more on page 11.
Wi-Fi
WPS
WAN/LAN
LAN
POWER
WPS
Repeater
Router
AP
LAN
WAN/LAN
WiFi
WPS
WAN/LAN
1
2
3
Repeater
Router
AP
Connect to an Existing WiFi Network
2
1.
Use a WiFi network manager on a computer or mobile
device (recommended) to find and connect to the
extender WiFi network “Coredy CX-E120_2.4G”.
Method 1: Connect with a web browser