Coredy CX-E120 - Update the Router Firmware

23
Password Settings
Time Zone Settings
Save/Reload Settings
Upgrade Firmware
The extender firmware (routing software) is stored in
flash memory. You might check if new firmware is
available at www.coredytech.com and to update your
product.
1.
Launch a web browser.
2.
Enter http://192.168.10.1/ or http://ap.setup/ in
the address field of the browser login screen
displays.
3.
Enter admin for the user name and admin for the
password, both in lowercase letters. The BASIC
Home screen displays.
4.
Select Upgrade Firmware
5.
Select a firmware file and click Upgrade.
6.
Reset the extender to factory setting after reboot
finished.
WARNING:
To avoid the risk of corrupting the firmware, do
not interrupt the upgrade. For example, do not
close the browser, click a link, or load a new
page. Do not turn off the router.
Update the Extender Firmware
4