Cormach MOTO MEC - Page 3

DECLARATION OF CONFORMITY
Complies with EN ISO/IEC 17050-1 and EN ISO/IEC 17050-2
C
ormach S.r.l., located in Via A. Pignedoli, 2 – 42015 Correggio (RE) – Italy,
Manufacturer of the wheel balancer line, model/s MOTO MEC
S
erial Number _____________________________
D
eclare under our own responsibility that the product to which this declaration relates, is in conformity
with the followings Directives:
- Directive 2006/42/EC (Machinery Directive, MD)
- Directive 2004/108/EC (Electromagnetic Compatibility Directive, EMC)
Th
e following harmonized standards have been applied:
- EN 60204-1:2006 + A1:2009
- EN ISO 11202:2010
- EN ISO 12100:2010
- EN ISO 13850:2012
- EN ISO 13857:2008
The technical file of the above mentioned machines is guarded by the manufacturer:
Cormach S.r.l., located in Via A. Pignedoli, 2 – 42015 Correggio (RE) – Italy
C
orreggio, 16.03.2015
IMPORTANT:
Any changes to the machine, ignoring the instructions contained in the user manual or use of the
machine other than that provided by the manufacturer, will invalidate this declaration.
The model of this declaration is in conformity with the requirements of Standard EN 45014