Cornelius VIPER FMFV User Manual

Cornelius VIPER FMFV

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

VIPER FROZEN MULTI FLAVOUR VALVE

INSTALLATION AND OPERATION MANUAL

Release Date: October 15, 2018

Publication Number: 919000012INS

Revision Date: October 16, 2019

Revision: B

Visit the Cornelius web site at www.cornelius.com for all your Literature needs.

Table of Contents

Questions and Answers:

S
Scott SandersAug 9, 2025
What to do if the Cornelius VIPER FMFV Control Unit valve is not dispensing the drink?
- Y
  ydavisAug 9, 2025
  If the Cornelius Control Unit valve isn't dispensing drinks, there could be several reasons. First, ensure the compressed air pressure in the regulator is set to 45±5. Then, check the electrical connection to the MAC valve; if it's faulty, replace the defective MAC valve. Also, check the display cable connection. Finally, consider ice bridging or ice ball formation, which may require hammering (refer to the Operation section) or defrosting (refer to the Viper Product Manual).
M
Michael HughesAug 25, 2025
Why is there continuous valve leakage in my Cornelius VIPER FMFV Control Unit?
- S
  Sierra VargasAug 25, 2025
  Continuous valve leakage in the Cornelius Control Unit can be due to a couple of issues. One potential cause is that the BIMBA cylinder is not closing or only partially closing, in which case you should replace the BIMBA cylinder. Another cause could be failure of the Diffuser assembly, requiring a service call to change the Diffuser or replace the O-ring.

Cornelius VIPER FMFV Specifications

General

Brand	Cornelius
Model	VIPER FMFV
Category	Control Unit
Language	English

Related product manuals