Standard Recommended Procedure 003-794-AEN | Issue 14 | March 2020 | Page 2 of 27
1. General
This document describes installation of the EDGE™ 1U, 1U-SP, 2U, and 4U Housing Solutions (Figure 1). Except
where installation of another housing is unique, only the 4U housing is illustrated.
2. Carton Contents
• Housing, either 1U, 1U-SP, 2U, or 4U rack-height
• Mounting hardware kit, either for rack or frame
• (1U-SP, 2U and 4U housings ONLY) (2) Fiber management ngers
3. Tools and Materials Required
3.1 Tools
• Phillips screwdriver
• Reel stand
3.2 Materials
• Hook-and-loop straps
Figure 1 — EDGE Housings
To Next Page
Loading...
