corob D600 extra - Dispensing Operation; Automatic Timed Processes

USING THE DISPENSER - 33
COROB™ D600 - D700 - D800 EXTRA
1 2
Figure 20
6.3.7 Dispensing
When the dispensing command is entered, the Autocap opens to expose the nozzles and the machine begins
to dispense the products included in the formula in the set amounts; the Autocap will automatically close when
dispensing is nished.
The dispensing time is the time required by the colorant of which the greatest amount is used in the formula.
6.4 Automatic timed processes
Colorant stirring is a timed process, activated automatically to properly store the product in the canisters and
keep it in ideal, homogeneous conditions for dispensing, through the movement of stirring paddles inside
canisters.
The recirculation process circulates the colorant through the dispensing circuits, avoiding pigment sedimentation
in the various parts of the circuit. The colorant leaves the bottom of the canister and returns in the canister
through the recirculation connector, without being dispensed through the nozzle center.
The duration and the interval between one stirring or recirculation cycle and another can be customized via
the conguration software (refer to the CorobTECH user’s manual), based on the nature of the products used
on the machine.
We recommend to keep the canisters closed with their corresponding lids; do not insert hands in the
canister even when no colorant is present.
When a timed process is in progress, the machine can still be used; the process will be suspended and restarted
after a few seconds that the machine is inactive.