MOBILTEX® DATA LTD.
Calgary, Alberta
www.corTalk.com
TITLE: RMU1 Installation and Configuration Guide
DOCUMENT NO.:
RMU1-MAN-001
Lockable bracket for Pro-Mark test station. (Padlock & test station not
included)
Mobiltex Part Number A20B03RMU10
Lockable NEMA4X Enclosure
6.75”W x 7.5”H x 5.5”D (171mm x 190mm x 140mm)
Comes with RMU1 bracket.
Mobiltex Part Number A03700RMU10
Adapter assembly for use with separate DC and AC coupon mode.
Integral 10 ohm shunt resistor.
Mobiltex Part Number A04060296A1
Large opening (36mm/1.42”) AC mitigation measurement
transformer. 126A AC full scale.
1.57” x 1.63” x 2.64”(40mm x 41.4mm x 67mm)
Includes 3.3’(1m) leads.
Mobiltex Part Number T01252RMU04
Medium opening (24mm/0.94”) AC mitigation measurement
transformer. 42A AC full scale.
1.34” x 2” x 2.64”(34mm x 51mm x 67mm)
Includes 3.3’(1m) leads.
Mobiltex Part Number T01252RMU02
Small opening (15.2mm/0.60”) AC mitigation measurement
transformer. 31A AC full scale.
1.22” x 1.26” x 1.81”(31mm x 32mm x 46mm)
Includes 3.3’(1m) leads
Mobiltex Part Number T01252RMU03
Electrical isolation shield.
Prevents accidental user contact with exposed test station termination
screws.
Mobiltex Part Number A20100RMU11
To Next Page
Loading...
