Corvalent Q77AX - AMT and USB Configuration

52
► AMT Configuration
Intel AMT
Enabled or Disabled
BIOS Hotkey Pressed
Enabled or Disabled
MEBx Selection Screen
Enabled or Disabled
Hide Un-Configure ME
Confirmation
Enabled or Disabled
MEBx Debug Message Output
Enabled or Disabled
Un-Configure ME
Enabled or Disabled
Amt Wait Timer 0
Disable ME
Enabled or Disabled
ASF
Enabled or Disabled
Activate Remote Assistance
Process
Enabled or Disabled
USB Configure
Enabled or Disabled
PET Progress
Enabled or Disabled
► USB Configuration
USB Configuration
USB Devices:
1 Drive, 1 Mouse, 2 Hubs
Legacy USB Support
Enabled and Disabled and Auto
Enabled Set this value to allow the use of USB devices during boot and
while using DOS
Disabled Set this value to prevent the use of any USB device in DOS or
during system boot.
Auto This option auto detects USB Keyboards or Mice and USB devices
to allow them to be utilized during boot and while using DOS.
EHCI Hand-off
Enabled or Disabled
USB hardware delays and time-outs
USB transfer time-out
1, 5, 10 or 20 sec
Device reset time-out
10, 20, 30 or 40 sec
Device power-up delay
Auto or Manual. If set to Manual, allows to set a fixed time