Cosmo GRP Series Installation Instructions

30
Removing the Handle
1. Locate the set screws on the handle end caps.
2. Loosen the set screw on one end with the Hex key while supporting the
handle. Do not remove the set screw from the handle end cap.
Set screw
Mounting fastener
3. Keep supporting the handle while loosening the set screw on the other
handle end cap.
4. Remove the handle from the mounting fasteners on the door and s et
aside.

Cosmo GRP Series Specifications

General

Brand	Cosmo
Model	GRP Series
Category	Ranges
Language	English