Cosmo GRP Series - Assembling the Surface Burners and Grates

43
ASSEMBLING THE SURFACE BURNER S AND GRATES
IMPORTANT: Do not operate the burners without all parts in place.
COS-GRP304 (30")
1. Check that all range controls are in the OFF position.
2. Remove surface burner bases and caps from package containing parts.
Align and place the burner bases and caps in the correct locations.
COS-GRP366 (36")
A. Rapid (Large)
B. Rapid (Large)
C. Semi Rapid (Medium)
D. Semi Rapid (Medium)
A. Rapid (Large)
B. Auxiliary (Small)
C. Double Ring (X-Large)
D. Semi Rapid (Medium)
E. Semi Rapid (Medium)
F. Rapid (Large)
A
B
C
D
E
F
A B
C D