42
Assembling Door
1. Firmly grasp both sides of the
door.
2. With the door at the same angle
as the removal position, which is
approximately five degrees or 2-3
inches from being fully closed,
seat the indentation of the hinge
arms into the bottom edge of the
hinge slots. The notch in the hinge
arms must be fully seated into the
bottom edge of the slots.
IMPORTANT: Do not lift door by
door handle.
3. Open the door fully. If the door
will not open fully, the indentation
is not seated correctly in the
bottom edge of the slots.
4. Lock the hinge locks, rotating
them back toward the slots in the
oven frame until they lock.
5. Close the oven door. Check that
the door is free to open and close
and is level while closed.
To Next Page
Loading...
Need help?
General
