46
QUALITY OF FLAMES
The combustion quality of the burner flames needs to be confirmed visually.
Soft blue flames
This is normal for natural gas.
Yellow tips on outer cones
This is normal for LP gas.
Yellow flames
This is abnormal for any gas operation.
Call for service.
If Burners Do Not Light Properly:
1. Turn cooktop control knob to the OFF position.
2. Check that the range is plugged into a grounded 3 prong outlet. Check
that the circuit breaker has not tripped or the fuse
has not blown.
3. Check that the gas shut-off valves are set to the open position.
4. Check that burner caps are properly positioned on burner bases.
Repeat start-up. If a burner does not light at this point, turn the control knobs
to the OFF position and contact your dealer or authorized service company
for assistance.
To Next Page
Loading...
Need help?
General
