COTLIN L Series - Routine Cleaning

File No: 1.9.01.00018 Version No:A
Note: Subsequent update versions of this manual will not be noticed.thank you.
service@cotlin.top
11 / 24

Initial launch.

Restart after a long downtime.

Confirm the inlet tap is open.

Confirm that the inlet valve has been opened.

The ice machine is powered on.

Check all water pipes and pipe joints to ensure no leakage.
14. Routine Cleaning
▲ Attention

It is strictly forbidden to wash this ice machine with a water sprayer. Do not use any alcohol-
containing liquid to clean or disinfect the ice maker, otherwise, it may cause cracks in plastic
parts;

Remove the roof or back panel, the front panel and other recommendations to the relevant
knowledge of personnel to remove;

Do not put plastic parts into water or dishwasher with a temperature over 40℃ to clean, so as
not to damage the parts.

Environmental cleaning: often clean the ice machine around to keep the environment clean, so that the
equipment gets the efficient operation.

Shell cleaning: clean the ice machine with a sponge dip neutral cleaning liquid and dry with a clean soft
cloth. use stainless steel cleaner if necessary.

Ventilation window cleaning: often wipe plastic ventilation window surface stains with dry rag to ensure
smooth ventilation.
★important
Some parts cleaning if necessary or not recommended to remove the front panel, demolition
please have the corresponding knowledge or under the guidance of professionals.