File No: 1.9.01.00018 Version No:A
Note: Subsequent update versions of this manual will not be noticed.thank you.
13 / 24
Brush the plastic parts around the evaporator with nylon brush;
ress the [switch] key in standby mode, the screen displays “off”, unplug the power plug, remove tw
screws on the water pump hanging plate and two screws on the float cover with a screwdriver, remov
the clamp , unplug the water supply pipe, and then remove the water pump and the connector at th
float to clean the float.
crub the sink with soft ground material such as a brush or sponge.