File No: 1.9.01.00018 Version No:A
Note: Subsequent update versions of this manual will not be noticed.thank you.
14 / 24
Important Tips
Please install all parts after clearing, install and cooperate correctly.
5. Cleaning and Disinfection
n order to make the operation of the ice making machine stable and efficient, the user has the
esponsibility to operate according to the requirements of cleaning and disinfection (the operation of
leaning and disinfection is not included in the warranty clause). If the ice maker needs frequent cleaning
nd disinfection, please check whether the water source is suitable, whether the use environment is clean or
hether the inappropriate water filter device is used.
5.1 Cleaning and Disinfection
Wear protective equipment such as rubber gloves, masks and protective glasses before cleaning
and disinfection operations.
Removal and installation of cleaned parts must be carried out in case of power failure.
Attention
Do not mix the disinfectant with the cleaning solution.
Do not clean the evaporator surface with sharp object.
It is recommended that this process be implemented at least once within 3 months.
1. Open the front panel of the ice maker to check if the ice maker evaporator is making ice. If ice is being
m
ade, a forced deicing program can be performed (see operation instruction "11.4 forced deicing "above)
o stop the deicing machine, press the [switch] key in standby state, the screen shows" OFF";