What to do if Countax B MK4 headlights fail to operate?
If the headlights on your Countax Lawn Mower aren't working, check the LED connections and ensure that fuse 3 (brown 7.5 amp fuse) hasn't blown.
What to check if Countax Lawn Mower tyres spin or lose grip?
If your Countax Lawn Mower's tires spin or lose grip, verify that all tires are inflated to their correct pressures. Also, consider whether you are going too fast for the conditions.
How to fix uneven cutting with Countax Lawn Mower?
To address uneven cutting with your Countax Lawn Mower, first ensure that all tires are inflated to their correct pressures and that the front axle is pivoting freely. Check that the deck brackets are moving freely and not locking up. Also, ensure that the deck is level from side to side and back to front. Finally, verify that none of the cutter blades are worn or damaged.
What to do if Countax Lawn Mower engine turns over and does not start?
If the engine turns over but your Countax Lawn Mower doesn't start, make sure the fuel tank is full and the outlet in the fuel tank is not blocked. Also, check that fuse 2 (brown, 7.5 amp) has not blown or been dislodged.
Why Countax B MK4 Lawn Mower cutter seems to lose power and the belt slips and overheats?
If your Countax Lawn Mower cutter loses power and the belt slips and overheats, ensure the cutter belt tension is correct. Also, check that the cutter deck isn't clogged with wet cuttings and that the cutter drive belt isn't worn.
What to do if Countax Lawn Mower cutter deck fails to operate?
If the cutter deck on your Countax Lawn Mower isn't working, check fuse 1 on the fuse holder (brown 7.5amp clutch fuse) to see if it has blown. Also, ensure you are seated, as the safety switch will disengage the cutter if you get off the seat. If the battery has lost charge, it may not hold the clutch in operation.
What to do if Countax B MK4 engine fails to restart during field use?
If your Countax Lawn Mower engine fails to restart during field use, begin by checking all the points listed for a general starting failure. Then, remove the ignition key, engage the parking brake, and wait for all moving parts to stop. Raise the deck and visually inspect for obstructions preventing deck rotation, without touching the cutting blades. If you find an obstruction, manually push the tractor away from the area and remove the deck if needed for safe removal. Also, check for obstructions under the chassis.
What to do if Countax B MK4 engine misfires, loses power or stalls in use?
If your Countax Lawn Mower engine misfires, loses power, or stalls, first ensure you have not run out of fuel. Check that the engine cooling air intakes are not blocked. Also, verify that fuse 4 (brown, 7.5amp) has not blown or been dislodged.
Guidance on using only Countax authorized replacement parts to maintain performance, durability, and safety.
Information for customers on reading and understanding the manual for proper assembly and operation.
Countax reserves the right to change product specifications without notice.
Explanation of safety alert symbols, signal words, and the importance of safety decals on the machine.
Detailed descriptions of various safety decals, including danger, warning, and caution symbols.
Overview of warning, caution, important, additional danger, and operation symbols.
Guidelines on operator training, age restrictions, child safety, and personal protective equipment.
Precautions for operating in various conditions, especially on slopes, to prevent accidents.
Safety guidelines for handling fuel, towing procedures, and using accessories.
Safety measures for batteries, servicing, transporting, and storing the tractor.
Identification and function of throttle, choke, and parking brake controls.
Location and function of ignition switch, forward/reverse pedals, and deck height lever.
Controls for engaging PTO, deck, and operating PGC/accessories.
Description of throttle lever and choke control on the dashboard.
Explanation of ignition switch and PTO/deck cutter configuration switch.
Overview of the central display panel and its indicators.
Details on fuel level, RPM counter, parking brake, and slope warning indicators.
Explanation of battery, cutting blade, PTO engage, and headlight indicators.
Information on net status indicators and deck height indicator.
Description of the digital clock function on the dashboard.
Essential pre-start checks and guidance on using the choke.
Functions of the ignition switch and the Reverse Mow Override system.
Using throttle controls and understanding dashboard icons.
Explanation of various indicator icons like battery, brake, and deck blades.
Information on PTO icon, headlight indicator, and RPM meter.
Details on net status indicators and deck height indicator.
Using the digital clock and understanding service interval notifications.
Instructions on operating drive pedals, stopping, and parking the tractor.
Information on using the transmission bypass valve and adjusting the seat.
How to engage the PTO, deck, and set cutting height.
Explanation of the RMO system and procedures for mowing in reverse.
How to engage the Powered Grass Collector (PGC) accessory.
Steps for emptying the PGC net.
Adjusting sweeper height and steps for standard grass collection.
Information on XRD decks, mulching plugs, and conversion options.
Details on correct blade installation and deck rotation.
Guidelines for using the High Grass Mulcher (HGM) Deck.
Rules for mulch mowing and belt arrangement diagrams.
Step-by-step instructions for removing the cutter deck from the tractor.
Guidance on installing the deck tension rod for belt stability.
Procedure for adjusting the tension rod length to set belt tension.
Instructions for setting the deck parallel to the ground front-to-back.
How to set anti-scalp wheels to prevent grass scalping.
Procedure for adjusting deck side-to-side levelling.
Procedure for securing the tension cradle when not using the deck.
Instructions for fitting the net and using the PGC lift lever.
How to tip the net to empty and install the PGC drive belt.
Steps for connecting the Powered Grass Collector to the tractor.
How to adjust the PGC lock for proper belt tension.
Guidelines for engine maintenance and battery care.
Procedures for cleaning the deck and checking drive belts.
Information on checking transmission oil level and drive belt.
Details on PTO accessory drive belt tension and installation.
Checks for when the engine fails to start or restart.
Checks for when the engine fails to turn over or start.
Troubleshooting engine misfires, power loss, or stalling.
Checks for when the cutter deck fails to operate.
Troubleshooting for headlights not operating and display failures.
Checks for when the PGC or other accessories fail to operate.
Diagnosing cutter start/stop issues and causes of uneven cutting.
Addressing poor cut quality, power loss, and belt slip.
Additional checks for cutter deck levelling problems.
Checks for when the collector is not picking up grass satisfactorily.
Addressing persistent flat tyres and loss of tyre grip.
Instructions for removing front and rear wheels.
List of part numbers and descriptions for replacement components.
List of optional accessories available for the tractor unit.
Visual checks to be performed before each use of the tractor.
Routine visual checks to be performed weekly.
Checks required after 20 hours of tractor usage.
Checks required after 50 hours of tractor usage.
Checks required for a full service after 100 hours usage.
General| Brand | Countax |
|---|---|
| Model | B MK4 Series |
| Category | Lawn Mower |
| Language | English |
To Next Page
