Cover Pools Save-T 3 - Mechanism Housing Types; Recessed Housing for Underside Track

All diagrams are for general information. Consult installation instructions for details.
7
Recessed Concrete, Wood, or UPB Box—Underside™ Track
Box Side View—Underside Track
B
T
[
W
D
O
M
conduit 6" max
from top
of box
conduit should not
protrude more
than 4" into box
POOL
conduit must be on the
motor end
3" drain - floor or wall
can be on either end
wall cut away for clarity
bond wire
pool beam wall
drain centerline 4"
max from end wall
bond wire
Optional coping or condrete build up.
lid
minimum 2" clearance
for tracks
MECHANISM HOUSING
Choose a recessed mechanism (concrete or wood box) or deck-mounted mechanism. Systems
include a lid assembly, bench frame assembly or fiberglass ends.
Underside Track
Box Dimensions for Save-T
®
3
MOTOR
M
OPPOSITE
O
BEAM
B
THROAT
T
DEPTH
D
WIDTH
W
Pools under
55 ft. long x 24 ft. wide
32" 10" 8-12" 2" min to
finished beam
12-1/2"
min
12-1/2"
min
UPB BOX Pools up to
55 ft. long
32" 10" 8-12" 2" min to
finished beam
13" 13"
Pools over
55 ft. long x 24 ft. wide
32" 10" 8-12" 2" min to
finished beam
14½" 14½"
Pools over 65 ft. long or 25 ft. wide and vanishing-edge pools — Call Cover-Pools 1-800-447-2838
4
Consult a certied electrician and the pre-wiring diagrams for conduit and bonding requirements.