Operation Part
No Operation Part Name Explanation
1
Hot water lock button
When the hot water lock button is pressed for
three seconds, hot water cannot be extracted,
even by pressing the hot water button, and an
alarm goes off.
2
Hot water button
To use hot water
, press the hot button, check if the
hot water mode lamp goes on, and extract water.
(However, the mode automatically returns to cold
water mode three seconds after hot water has
been extracted.)
3
Room water button
To use room water
, press the room button and
extract water.
4
Cold water button
Press the cold button, check if the cold water
mode lamp is on, and extract water.
5
Cold/hot/room
temperature water
extraction button
Button to select and extract cold/hot/room
temperature water.
A
set quantity of water is extracted by touching it
once; watee is extacted continuously when it is
touch for about 2 seconds or more.
1
Hot water lock
button
2 Hot water
button
3 Room water
button
4 Cold water
button
5 Cold/hot/room temperature
water extraction button
To Next Page
Loading...
Need help?
General
