No. Explanation Reference picture
1 1) Select the cold button to drink cold water.
-
To drink cold water, the cold water function
must be operating. Press the cold button
for three seconds, and the cold water
mode lamp comes on; you can then use
cold water
. If you don’t need the cold
water
, press the cold button again for three
seconds, and the lamp goes out, exiting
cold water mode.
2 1)
To drink cold water, press the cold button after
the cold water lamp comes on.
- T
o drink cold water, select the cold button
and touch the extraction part, and you can
extract a cupful of water. If you touch the
extraction part again during extraction,
water stops flowing.
3
1)
To drink room water, select the room button.
-
Select the room water button and touch the
extraction part, and you can extract a cupful
of water. If you touch the extraction part
again during extraction, water stops flowing.
Connect it to voltage rating that matches it on the rating plate.
Then, open the feed valve to supply water to the filtration system.
3-3 Checking the system after installation
To Next Page
Loading...
Need help?
General
