Disassembling and refitting
Coway co., Ltd
4-1
4. Disassembling and refitting
4-1 Disassembling and refitting information
4-1-1 Disassembling and refitting information
Before disassembling the product
- Unplug the system to prevent electric shock.
- Close the feed water supply valve to shut off the water supply.
- Completely drain the water from the water tank.
If water is splashed during the repair
, insulation may deteriorate, resulting in danger
.
- When disassembling and refitting the unit with its side touching the ground, perform the job on a
working cloth. Without the working cloth, the product may get scratches.
Safety checking after the service
- Check that screws, parts, and wiring are in their original positions.
- Check that the wire coverings are not damaged.
- After refitting, check that water purification works.
- Check the tubing for water leaks.
- Check that all switches operate normally.
- After the service, refit the product in its original state.
Exercise caution not to damage or deform any parts when disassembling the system.
Refit the system in the reverse order of disassembling.
4-1-2 Necessary tools
Tool Tool name
‘+’ Cross-head screwdriver
‘-’ Flat-bladed screwdriver
Nipper
Adjustable spanner
To Next Page
Loading...
Need help?
General
