CPS FA1000 SERIES User Manual

FA1000 SERIES REFRIGERANT RECOVER
/ RECYCLE / EVACUATION AND RECHARGE UNIT
OPERATION MANUAL
Models: FA1000, FA1000A, FA1000B FA1000AB, FA1000E, FA1000J
Unit covered under US Patent
8,082,750 and other patents
pending.
Certied by ITS under SAE
J2911 to meet SAE J2788 for
R-134a.
Certied by ITS under SAE
J2911 to meet high voltage
compressor service per SAE
2788 for R-134a.

CPS FA1000 SERIES Specifications

General

Type	Programmable DC Power Supply
Voltage Regulation	≤ 0.01% + 2mV
Display Type	LCD
Interface	USB
Operating Temperature	0°C to 40°C
AC Input Voltage	220V ±10%
AC Input Frequency	50/60 Hz

Summary

Introduction

General Safety Instructions

Initial Equipment Preparation

FA1000 Initial Set-Up

Operating Instructions

Recover Mode

Evacuate Mode

Charge Mode

Full Cycle Mode

Refill Mode

Maintenance

Filter Change

Procedure for changing the refrigerant filter drier.

Vacuum Oil Check

Scale Accuracy and Re-Zeroing

PT Sensor/Gauges Calibration

High Voltage A/C Charging Instructions

Troubleshooting

Service Parts and Accessories

Warranty and Repair Policy

Details on CPS warranty coverage and repair procedures.