ETHERNET PORT GROUP EDITOR
A Port Group represents a logical grouping of Ethernet ports. Any
computers physically connected to ports in a group will be allowed
to freely communicate with each other.
NOTE: You must separately ensure that this logical interface is attached to a
Local IP Network in the top panel of this page.
Port Group ID: The Group ID field provides a reference to this
port group to be used in other parts of the router configuration.
For example, this ID is referenced in the Local IP Networks
configuration to attach this group of Ethernet ports to a network
configuration. Use a simple short text phrase to describe a group,
such as "main", "guestport", etc.
To Next Page
Loading...
