CRADLEPOINT CBR400| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 78
Ethernet Port Group Editor
Port groups are less relevant for the CBR400 than for
some other CradlePoint routers because it has only one
port. However, you can still change the port group ID for
your Ethernet port.
Port Group ID: The Port Group ID field provides a
reference for a port group to be used in other parts of the
router configuration. For example, this ID is referenced in
the Local IP Networks configuration to attach this
Ethernet port with a network configuration. Use a simple
short text phrase to describe this port group, such as
"main", "guestport", "LAN", etc.
To Next Page
Loading...
