To Next PageTo Next Page
Need help?Do you have a question about the Craftsman GUIDE MASTER 171.25468 and is the answer not in the manual?
General| Model | 171.25468 |
|---|---|
| Type | Circular Saw |
| Brand | Craftsman |
| Category | Power Tool |
| Voltage | 120V |
| No Load Speed | 5000 RPM |
| Blade Size | 7-1/4 inches |
| Arbor Size | 5/8 inches |
Understand tool applications, limitations, work area, and environmental hazards.
Wear safety goggles and appropriate apparel; secure workpieces to prevent injury.
Keep guards, remove keys, disconnect before servicing, check for damaged parts.
Avoid accidental starting, overreaching, and leaving tools running unattended.
Avoid explosive atmospheres and operating under the influence of impairing substances.
Introduction to the push shoe's functions and limitations.
Instructions for unpacking and checking all parts before assembly.
Step-by-step guide for assembling the handle, fences, and miter pointer.
Instructions for fitting the rubber end cap onto the hold down stick.
Performing edge routing and adjusting fences for workpiece stability.
Techniques for feeding stock and converting to a miter gauge.
Using the tool as a bit height gauge, scale, and dovetail gauge.
A comprehensive list of all parts with reference numbers and descriptions.
