Creality CR-10 Smart Pro - Network Reset Procedure; Initiating Network Reset; Confirmation Prompt for WiFi Reset; Network Reset Usage Note

11. Start Printing 开始打印17. Network reset 网络复位
>>
1. In the first use or if you need to clear the owner information, you can click “Restore network” button on the screen,
wait for 1-2 minutes and then try to scan the code again or connect the network via Bluetooth.
1. 在首次使用或需要清除机主信息时，可点击屏幕‘恢复网络设置’后，等待1-2min尝试重新扫码或蓝牙连接配网。
Note:
注意：
>>
25