Creality CR-5060 - User Manual

◆ Because of software or hardware upgrades and model differences,
new revisions may not be listed in this Manual.
◆ Please plug the power cord into a three-hole power jack.
◆ Detailed instructions for use are available in the storage card.
V.2.0
3D Printer User Manual
Applicable Models：
CR-5/CR-5S/CR-3040
CR-4026/CR-4040
CR-5060/CR-5080 etc.

Summary

Important Safety and Usage Notes

3 D Printer Introduction and Components

Printer Components and Tool Kit

Step-by-Step Device Installation Guide

Understanding the Printers Screen Interface

Filament Loading and Replacement Guide

Manual Bed Levelling Procedure

Creality Slicer Software Installation

Initiating Your First 3 D Print

After-Sales Service and Warranty Information

Creality CR-5060 Specifications