Need help?Do you have a question about the Creality CR-5 Pro and is the answer not in the manual?
Guide on how to use the auto-levelling feature for printer calibration.
Instructions for preheating the nozzle and bed for printing.
Step-by-step guide for loading filament into the 3D printer.
Guide on how to use the auto-levelling feature for printer calibration.
Instructions for preheating the nozzle and bed for printing.
Step-by-step guide for loading filament into the 3D printer.
General| Layer Resolution | 0.1 - 0.4 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 100°C |
| Connectivity | USB, SD Card |
| Printing Speed | 30 - 60 mm/s |
| Supported Materials | PLA, ABS, PETG, TPU |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Display | 4.3-inch Touch Screen |
| Machine Dimensions | 530 x 487 x 612 mm |
| Build Volume | 300 x 225 x 380 mm |
To Next Page
