Creality CR-X User Manual

Insert the TF card → Print → Select Model → Print
2. Print
09/
First Printing
1.Slicing
Insert TF card into computer with Reader.
Open the software→Load→Select the file→Wait for slicing to finish ,and save the gcode file
to TF card.
How to print in two colors
(Dual-Color printer)
Load all parts of models
R-Click to merge models

Creality CR-X Specifications

General

Build Volume	300 x 300 x 400 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Extruder Type	Dual Extruder
Bed Leveling	Manual
Nozzle Quantity	2
Printing Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Connectivity	USB, SD card
Supported Materials	PLA, ABS, TPU, Wood